Bracelet Silicone Moulds
Bracelet Silicone Moulds
Bracelet Silicone Moulds
Bracelet Silicone Moulds
Bracelet Silicone Moulds
Bracelet Silicone Moulds
  • Load image into Gallery viewer, Bracelet Silicone Moulds
  • Load image into Gallery viewer, Bracelet Silicone Moulds
  • Load image into Gallery viewer, Bracelet Silicone Moulds
  • Load image into Gallery viewer, Bracelet Silicone Moulds
  • Load image into Gallery viewer, Bracelet Silicone Moulds
  • Load image into Gallery viewer, Bracelet Silicone Moulds

Bracelet Silicone Moulds

Regular price
$3.00
Sale price
$3.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Turn craft into fashion with our variety of bracelet moulds! 

To use, mix your resin as instructed. We recommend using our NEW Casting Epoxy Resin for best results, however our original Drippy Resin also works perfectly fine. Colour your resin with pigment pastes, inks, glitters or any other mix ins and pour into your mould in a thin stream to avoid getting trapped air bubbles. Allow your resin to set for at least 48hrs before demoulding if using the casting resin and 24hrs if using the 1:1 epoxy resin.

Wide Bracelet Mould A: This mould has a slightly curved surface and is 3cm wide once demoulded. This is the mould if you really want to make a statement. Internal diameter 6.5cm, 3cm wide

Diamond Bracelet Mould B: This mould features a subtle diamond shape pattern/harlequin texture on the inside - this will give your resin creation a texture and dimension that shines from all angles! Internal diameter 6.2cm, 2cm wide

Large Bracelet Mould C: This plain bracelet mould features a curved edge and a simple, thin width. Perfect for those that want to keep it classic. Internal diameter 6cm, 1cm wide

Small Bracelet Mould D: This plain bracelet mould features a curved edge and a simple, thin width - same as bracelet mould C except with a smaller diameter, better for a smaller wrist. Internal diameter 5.5cm, 1cm wide

Angled Bracelet Mould E: This chunky bracelet mould features an angled design for an edgy and unique finish to your resin. Internal diameter 6cm, 2.5cm wide

Small Diamond Mould F: This mould features a subtle diamond shape pattern/harlequin texture on the inside - this will give your resin creation a texture and dimension that shines from all angles! Same design as Bracelet Mould B but half the width. Internal diameter 6.2cm, 1cm wide